Configuring a service

Services are configured on the Orchestrator by the BlastShield™ Administrator.

To learn how to configure a service watch the following video or read the steps below.

1. Log in to the Orchestrator as the Administrator user.

2. Go to the Access Control  menu and choose Services.

3. Click on the Add new service button.

   1. In the Service Name box, enter the name of the service.  You can use any name.

   2. In the IP Protocol  box, select the appropriate protocol to match the service you want to define.

   3. In the Port Ranges box, enter the port number(s) to match the service you want to define.

4. If you want to add another IP protocol and port range to the service definition, click on the Add IP Protocol button and repeat the previous two steps.

5. When you are finished, click save service.