Modify an Endpoint

To learn how to modify an endpoint, watch the following video or read the steps below.

1. From within the Orchestrator, select "Endpoints" to display the Endpoint List from the menu on the left

2. Select the desired Endpoint from the Endpoints List

3. Modify the Endpoint Name or other attributes. The attributes which you can change are as follows:

   1. Name

   2. DNS hostname

   3. Protected IP Address.

      If you change the protected IP address , be sure you do not choose an an IP address which is already in use on your BlastShield™ network or communications problems will result.

4. When finished, select "Save Changes"