Create an Endpoint in an AWS Gateway
From within the Orchestrator, select "Gateways" from the left Menu
Select the desired Gateway from the Gateway List
Select "Add New Endpoint"
Enter a name for the new endpoint
Check "Endpoint Enabled" to Enable it when done (Note, the endpoint must be enabled to modify the IP address)
The IP address is auto-populated. You can change it to another IP address if necessary
Set the Endpoint Destination identifier.
NAT Addressing Mode (used for Cloud Gateways).
Find the IP address of the EC2 virtual instance which you will protect with the Gateway.
Enter the IP address for the EC2 virtual instance into the Destination (IP Address) box in the Endpoint configuration on the Orchestrator.
Select "Save Changes" to confirm.
